LM Series Level Mounts

lm series_main

Compact Rubber-to-Metal Mount with Integrated Levelling System. Made from Steel (with Yellow Painted Finish) and CR Grade Elastomer. Available in seven different sizes each in four shore hardnesses.
Benefits

  • Anchor free installation
  • Yellow Painted Finish
  • Forged Pressure Plate
  • Provide Active & Passive Support
  • Excellent Shock Isolators
  • Levelling range 5-30mm
  • Nat Freq. 6-20Hz
  • Load Range 10daN – 11000da/N
  • Available with optional Bolt Down Base Plate

Applications
Due to their design Effbe LM Levelmounts are ideal for use in the following applications:

  • Injection Moulding Machines
  • Die Casting Machines
  • Punch Presses
  • Lathes
  • Grinders
  • Jig Borers
  • Screw Machines
  • Milling Machines, etc.

For information relating to specific applications, please contact CMS Vibration Solutions Technical Department. To aid in the correct material being recommended, please provide as much information on the application as possible, such as:

  • Weight of Machine
  • Motor Speed (RPM)
  • Channel, Plinth or individual footprint dimensions

Information relating to the correct adhesive can be sought from CMS Vibration Solutions Technical Department

    Physical Information
    Metal Parts : St W23 Yellow Painted
    Elastomer : CR Grade ( High elasticity, Oil resistant, Anti ageing compound)
    lm series_new

  1. Load Capacities
    1 1-4 1-6 1-11 3-11 3-25 3-33
    Load per element in daN
    Presses, general, number of strokes up to 100/min (max.) 200 320 450 500 700 1000
    Excentric presses and automatic punching machines, number of strokes 300/min (max.) 130 240 - 400 600 -
    Please contact us for higher stroke numbers
    Lathes - - 220 - 300 420
    Milling machines - - 300 250 400 600
    Surface grinding machines - - 220 - 300 420
    Machines, general 220 380 480 650 900 1200
    Static maximum load 260 430 600 880 1200 2000
    1 5-27 5-42 5-55 6-60 6-80 6-66
    Load per element in daN
    Presses, general, number of strokes up to 100/min (max.) 900 1300 2000 1800 3000 3500
    Excentric presses and automatic punching machines, number of strokes 300/min (max.) 700 950 - 1300 2300 -
    Please contact us for higher stroke numbers
    Lathes - 500 1000 700 1200 2000
    Milling machines 400 700 1500 1000 2000 2800
    Surface grinding machines - 500 1000 700 1200 2000
    Machines, general 1100 1600 3000 2500 3500 4000
    Static maximum load 1400 2200 4000 3200 5000 5500
    1 7-65 7-100 7-77 8-250 8-250 X1
    Load per element in daN
    Presses, general, number of strokes up to 100/min (max.) 4000 5000 6500 10000 9000
    Excentric presses and automatic punching machines, number of strokes 300/min (max.) 3000 4000 - 7000 6000
    Please contact us for higher stroke numbers
    Lathes 1100 1700 3000 2500 -
    Milling machines 1800 2300 3600 3500 -
    Surface grinding machines 1100 1700 3000 2500 -
    Machines, general 4600 6400 7200 10000 10000
    Static maximum load 5200 7000 8000 11000 11000

    All load capacities stated in the above tables are advisory only, and have been computed for cases where the stated types of equipment will remain in position when supported on unanchored mounts. Load ranges in the above table lacking blue backgrounds represent vibration-isolation equipment mounts to be custom-tailored to suit particular applications based on performance diagrams.

  2. Dimensions
    Dimensions Table (Unit: mm) 0-2 1-2 1-11 3-6 3-33 5-11 5-55
    0-4 1-4 - 3-11 - 5-27 -
    - 1-6 - 3-25 - 5-42 -
    Standard Version
    Diameter D 40 80 120 160
    Height H 15 30 25 37 32 41 35
    Thread size G M5 M10 M12 M16 x 1.5
    Screw length L 30 80 90 100
    Max. predestal thickness - 11 43 44 44
    Levelling height Ni 5 15 20 20
    Weight kg 0.05 0.4 1.1 2.2
    Bottom plate BA
    Length B - 83 - 158 - 220 -
    Width A - 83 - 90 - 114 -
    Thickness T - 3.5 - 10 - 10 -
    Hole spacing b - 65 - 140 - 190 -
    Bore d - 8 - 13 - 16 -
    Weight BA type kg - 0.6 - 2 - 3.1 -
    Dimensions Table (Unit: mm) 6-60 6-66 7-65 7-77 8-200 8-200x1
    6-80 - 7-100 - 8-250 8-250x1
    - - 7-150 - 8-300 8-300x1
    Standard Version
    Diameter D 185 238 315
    Height H 45 39 60 54 70 100
    Thread size G M20 x 1.5 M24 x 1.5 M30 x 2
    Screw length L 120 140 160
    Max. predestal thickness - 58 70 80
    Levelling height Ni 20 20 30
    Weight kg 4 8.5 8 19 21
    Bottom plate BA
    Length B 245 - 300 - - -
    Width A 150 - 197 - - -
    Thickness T 10 - 15 - - -
    Hole spacing b 215 - 265 - - -
    Bore d 20 - 20 - - -
    Weight BA type kg 6.6 - 15 - - -

    Effbe LM Level Mount Diagram 1&2

LM Series Technical Graphs
Bold lines indicate optimal vibration isolation values.